1. High sound pressure can be attaind with low current consumption.
Minimum resonance freqrency is low.
2. Automatic mounting and
thermostable reflow soldering is possible through the use of liquid crystal polymers for the housing.
3. Coil wires are all treated inside enabling handling to be easy.
Description The Bel V7PA-03A series modules are non-isolated, step down DC/DC power converters that operate from a nominal 12V source. These converters are available in a range of output voltages from 1.5V to 3.3V. They are packaged in a single-in-line footprint and provide a maximum 3A output. Standard features include remote on/off, over current protection and output voltage adjust. These products may be used almost anywhere low-voltage silicon is employed and a 12V source is available. Typical applications include file servers, routers, line cards and other computing and communications equipment.
• Nonisolated • Fixed frequency • High efficiency means less power dissipation • Optimized for cost • Remote on/off • Undervoltage lockout • Over current and short circuit protection
Applications • Telecommunications • Networking • Computers and peripherals
DESCRIPTION NL10276AC30-03A is a TFT (thin film transistor) active matrix color liquid crystal display (LCD) comprising amorphous silicon TFT attached to each signal electrode, a driving circuit, a CRT interface board and a backlight. NL10276AC30-03A has a built-in backlight with an inverter. The 38cm(15” inches) diagonal display area contains 1024 × 768 pixels and can display full-color (more than 16 million colors simultaneously). Also, it has wide viewing angle and multi-scan function. CRT interface board installed in this module allows you to achieve the LCD monitor with an analog RGB interface.
FEATURES • High luminance • Wide viewing angle • Multi-scan function: e.g., XGA, SVGA, VGA, VGA-TEXT, PC-9801, MAC • Incorporated edge type backlight (Two lamps into two lamp holders, Inverter) • Lamp holder replaceable (Part No. 150LHS03) • On Screen Display • CRT interface board • Auto recognition of input signal Analog RGB signals, Sync on green, Synchronous signals (Hsync, Vsync, Composite) • Digital control: e.g., Luminance, Display position • Free supply voltage sequence • Corresponding to DDC1 and DDC2B • Corresponding to VESA DPMS
APPLICATIONS • Desk-top type of PC • Engineering work station