GRM219R60J186ME47L データシートの表示（PDF） - Murata Manufacturing
部品番号
コンポーネント説明
一致するリスト
GRM219R60J186ME47L Datasheet PDF : 30 Pages
| |||
■ Specifications and Test Methods
No
Item
1 Rated Voltage
Specification
Shown in Rated value.
2 Appearance
3 Dimension
4 Voltage proof
No defects or abnormalities.
Within the specified dimensions.
No defects or abnormalities.
5 Insulation Resistance(I.R.)
More than 50Ω ∙ F
6 Capacitance
Shown in Rated value.
Test Method
(Ref. Standard:JIS C 5101, IEC60384）
The rated voltage is defined as the maximum voltage which may be
applied continuously to the capacitor.
When AC voltage is superimposed on DC voltage, VP-P or VO-P,
whichever is larger, should be maintained within the rated voltage
range.
Visual inspection.
Using calipers. (GRM02 size is based on Microscope)
Measurement Point :Between the terminations
Test Voltage : 250% of the rated voltage
Applied Time
: 1 to 5 s
Charge/discharge current : 50mA max.
Measurement Point : Between the terminations
Measurement Voltage : DC Rated Voltage
Charging Time
:1 min
Charge/discharge current : 50mA max.
Measurement Temperature :Room Temperature
Measurement Temperature :Room Temperature
7 Dissipation Factor (D.F.)
8 Temperature No bias
Characteristics
of Capacitance
50% of
the rated
voltage
B1,R1,B3,R6,R7,C6,C7,C8,E7,D7 : 0.1 max.
D8,GRM31CR60J107 : 0.15 max
*Table 1
GRM31CR71E106 : 0.125
GRM033 B3/R6 1A 123 to 823
max
GRM033 B3/R6 1A 104
GRM155 B3/R6 1A 124 to 105
GRM185 B3/R6 1C/1A 105
GRM185 C8/D7 1A 105
GRM188 B3/R6 1C/1A 225
GRM188 R7/C8/D7 1A 225
GRM188 B3/R6 1A 335
GRM219 B3/R6 1C/1A 475
GRM219 C8 1A 475
GRM219 B3/R6 1A 106
GRM21B B3/R6 1C/1A 106
GRM21B R7/C8 1A 106
GRM319 B3/R6 1C/1A 106
B1,B3 : Within +/-10%
R1,R7 : Within +/-15%
R6 : Within +/-15%
C6 : Within +/-22%
C7 : Within+/-22%
C8 : Within +/-22%
E7 : Within +22/-56%
D7 : Within +22/-33%
D8 : Within +22/-33%
(-25°C to +85°C)
(-55°C to +125°C)
(-55°C to +85°C)
(-55°C to +85°C)
(-55°C to +125°C)
(-55°C to +105°C)
(-55°C to +125°C)
(-55°C to +125°C)
(-55°C to +105°C)
B1: Within +10/-30%
R1: Within +15/-40%
Capacitance
*1 C≦10μF
(10V min.)
*2 C≦10μF
(6.3V max.)
C＞10μF
Frequency
1.0+/-0.1kHz
1.0+/-0.1kHz
120+/-24Hz
Voltage
1.0+/-0.2Vrms
0.5+/-0.1Vrms
0.5+/-0.1Vrms
*1 For items listed in Table 1 on the left, the capacitance should
be measured using a voltage of 0.5+/-0.1Vrms instead of
1.0+/-0.2Vrms.
*2 For item GRM188R70J105, the capacitance should be measured
using a voltage of 1.0+/-0.2Vrms instead of 0.5+/-0.1Vrms.
The capacitance change should be measured after 5 min.
at each specified temp. stage.
In case of applying voltage, the capacitance change should be
measured after 1 min. with applying voltage in equilibration of
each temp. stage.
Capacitance value as a reference is the value in step 3.
· Measurement Voltage
GRM155R61A475 only : 0.10+/-0.03Vrms
GRM033B31C 123 to 104, GRM152B31A 104/224,
GRM188B30J 475/106, GRM21BB31A226 only : 0.20+/-0.05Vrms
GRM022R60J 153 to 104 only : 0.2+/-0.1Vrms
GRM21BR71A106 only : 0.35+/-0.05Vrms
GRM319R61K225 only : 2.0+/-0.4Vrms
Step
Temperature(C)
1
Reference Temp.+/-2
2
Min.Operating Temp. +/-3
3
Reference Temp. +/-2
4
Max.Operating Temp. +/-3
5
Reference Temp. +/-2
6
Min.Operating Temp. +/-3
7
Reference Temp. +/-2
8
Max.Operating Temp.+/-3
Applying Voltage(VDC)
No bias
50% of
the rated voltage
(For B1,R1)
9 Adhesive Strength
of Termination
No removal of the terminations or other defect
should occur.
･Initial measurement
Perform a heat treatment at 150+0/-10°C for 1h and then
let sit for 24+/-2h at room temperature,then measure.
Solder the capacitor on the test substrate shown in Fig.3.
Type
GRM02
GRM03
GRM15/GRM18
GRM21/GRM31/GRM32
Applied Force(N)
1
2
5
10
Holding Time
: 10+/-1s
Applied Direction : In parallel with the test substrate and vertical with the
capacitor side.
JEMCGS-00047W
2
Share Link: 