datasheetbank_Logo
データシート検索エンジンとフリーデータシート

CMX641A データシートの表示(PDF) - MX-COM Inc

部品番号
コンポーネント説明
一致するリスト
CMX641A Datasheet PDF : 23 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
Dual SPM/Security Detector/Generator
13 of 23
CMX641A Advance Information
4.2.2.1.4 ASK Tone Output
This is output from the TONE OP pin under the control of the TONE ASK input and the TX TONE SELECT
pins. The TONE ASK pin keys the transmit tone on-off. A logic high corresponds to no tone and logic low to
tone. The output frequency is selected by the TX TONE SELECT pin. A logic high selects 12kHz and logic
low selects 16kHz. (See Table 8). The tone output is ramped up to its maximum level and down to nil output
with time constants of TBD and TBD respectively.
TONE ASK
0
0
1
TX TONE SELECT
0
1
X
TONE OP
16kHz
12kHz
BIAS
Table 8: Selecting Transmission Tone in Enhanced Features Mode
4.2.3 Features Common to both Operating States
In both states, three output formats are available for the channel output pins. These output formats are
selectable via the logic input pins OP SELECT and OP ENABLEN. (See Table 8).
i. In Tone Follower mode, the logic output has very short response and deresponse times so that it forms
an ‘envelope’ of the input tone. Host systems will decide whether the received signal fulfils the system
tone pulse length requirements.
ii. In Packet mode, the channel output only responds after 40ms of received continuous tone. The
CMX641A then ignores the erroneous 20ms on, 20ms off “ringing” pattern which occurs on some
telephone lines.
iii. The deresponse time is also 40ms, so that the decode output pin forms a delayed envelope of the input
tone and host systems can decide, as in the Tone Follower mode, whether the received tone duration
fulfils local system requirements.
iv. The outputs can be set to a high impedance state for device multiplexing.
OP ENABLEN
0
0
1
OP SELECT
0
1
X
CH1 & CH2
OP FORMAT
Packet Mode
Tone Follower Mode
High Z
Table 9: Selection of Output Format via OP ENABLEN and OP SELECT pins
ã2001 MX-COM, Inc.
www.mxcom.com Tel: 800 638 5577 336 744 5050 Fax: 336 744 5054
Doc. # 20480227.002
4800 Bethania Station Road, Winston-Salem, NC 27105-1201 USA All trademarks and service marks are held by their respective companies.

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]