MA730(2017) データシートの表示（PDF） - Monolithic Power Systems
部品番号
コンポーネント説明
一致するリスト
MA730 Datasheet PDF : 11 Pages
| |||
EVKT-MACOM – MAGALPHA COMMUNICATION KIT
4. Connect Daughter Board To The Sensor Board (EVKT-KNOB or TBMA)
Use the provided ribbon cable to connect the connector board to the sensor board.
The EVKT-KNOB comes with a pre-soldered female socket connector, while TBMA boards do not. The
TBMA boards require the female connectors to be hand soldered in order to be used with the EVKT-
MACOM. Before soldering, place the connector polarization slot next to pin 1 (see Figure 15).
CN1
CN2
TBMA-Q-RD
Figure 15: Solder Connectors CN1 and CN2 to TBMA
On the TBMA boards (RD and LT), the CN1 connector must be connected to the TBMA-CONN CN1
connector using one of the two provided ribbon cable with 8 conductors (see Figure 16 and Figure 17).
The CN2 connection is not required for SPI communication but provides easy access to the MagAlpha
output signals on the LPC-Link2 daughter board.
CN1
CN2
TBMA-Q-RD
CN1
TBMA-CONN
CN2
Figure 16: Connect TBMA-RD to TBMA-CONN Board
CN1
CN2
CN1
TBMA-CONN
CN2
Figure 17: Connect TBMA-LT to TBMA-CONN Board
EVKT-MACOM
www.MonolithicPower.com
11
3/15/2017
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2017 MPS. All Rights Reserved.
Share Link: 