4070M3 データシートの表示（PDF） - Power Innovations
部品番号
コンポーネント説明
一致するリスト
4070M3 Datasheet PDF : 14 Pages
| |||
TISP4070M3BJ THRU TISP4095M3BJ, TISP4125M3BJ THRU TISP4200M3BJ,
TISP4240M3BJ THRU TISP4400M3BJ
BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS
NOVEMBER 1997 - REVISED MARCH 1999
This TISP4xxxM3BJ range consists of thirteen voltage variants to meet various maximum system voltage
levels (58 V to 275 V). They are guaranteed to voltage limit and withstand the listed international lightning
surges in both polarities. These medium (M) current protection devices are in a plastic package SMBJ
(JEDEC DO-214AA with J-bend leads) and supplied in embossed tape reel pack. For alternative voltage and
holding current values, consult the factory. For higher rated impulse currents in the SMB package, the 100 A
10/1000 TISP4xxxH3BJ series is available.
absolute maximum ratings, TA = 25°C (unless otherwise noted)
RATING
‘4070
‘4080
‘4095
‘4125
‘4145
‘4165
Repetitive peak off-state voltage, (see Note 1)
‘4180
‘4200
‘4240
‘4265
‘4300
‘4350
‘4400
Non-repetitive peak on-state pulse current (see Notes 2, 3 and 4)
2/10 µs (GR-1089-CORE, 2/10 µs voltage wave shape)
8/20 µs (IEC 61000-4-5, combination wave generator, 1.2/50 voltage, 8/20 current)
10/160 µs (FCC Part 68, 10/160 µs voltage wave shape)
5/200 µs (VDE 0433, 10/700 µs voltage wave shape)
0.2/310 µs (I3124, 0.5/700 µs voltage wave shape)
5/310 µs (ITU-T K20/21, 10/700 µs voltage wave shape)
5/310 µs (FTZ R12, 10/700 µs voltage wave shape)
10/560 µs (FCC Part 68, 10/560 µs voltage wave shape)
10/1000 µs (GR-1089-CORE, 10/1000 µs voltage wave shape)
Non-repetitive peak on-state current (see Notes 2, 3 and 5)
20 ms (50 Hz) full sine wave
16.7 ms (60 Hz) full sine wave
1000 s 50 Hz/60 Hz a.c.
Initial rate of rise of on-state current, Exponential current ramp, Maximum ramp value < 100 A
Junction temperature
Storage temperature range
SYMBOL
VDRM
ITSP
ITSM
diT/dt
TJ
Tstg
VALUE
± 58
± 65
± 75
±100
±120
±135
±145
±155
±180
±200
±230
±275
±300
UNIT
V
300
220
120
110
A
100
100
100
75
50
30
32
2.1
300
-40 to +150
-65 to +150
A
A/µs
°C
°C
NOTES: 1. See Applications Information and Figure 10 for voltage values at lower temperatures.
2. Initially the TISP4xxxM3BJ must be in thermal equilibrium with TJ = 25°C.
3. The surge may be repeated after the TISP4xxxM3BJ returns to its initial conditions.
4. See Applications Information and Figure 11 for current ratings at other temperatures.
5. EIA/JESD51-2 environment and EIA/JESD51-3 PCB with standard footprint dimensions connected with 5 A rated printed wiring
track widths. See Figure 8 for the current ratings at other durations. Derate current values at -0.61 %/°C for ambient temperatures
above 25 °C
PRODUCT INFORMATION
2
Share Link: 