ACT4533YH-T1026 データシートの表示（PDF） - Active-Semi, Inc
部品番号
コンポーネント説明
一致するリスト
ACT4533YH-T1026 Datasheet PDF : 16 Pages
| |||
ACT4533
Rev 1, 25-Feb-13
ORDERING INFORMATION
PART NUMBER OPERATION TEMPERATURE RANGE
ACT4533YH-T
-40°C to 85°C
ACT4533YH-T1026
-40°C to 85°C
PACKAGE
SOP-8EP
SOP-8EP
PINS
8
8
PACKING
TAPE & REEL
TAPE & REEL
PIN CONFIGURATION
PIN DESCRIPTIONS
PIN
NAME
DESCRIPTION
1
HSB
High Side Bias Pin. This provides power to the internal high-side MOSFET gate driver.
Connect a 22nF capacitor from HSB pin to SW pin.
2
IN
Power Supply Input. Bypass this pin with a 10µF ceramic capacitor to GND, placed as
close to the IC as possible.
3
SW
Power Switching Output to External Inductor.
Ground. Connect this pin to a large PCB copper area for best heat dissipation. Return
4
GND
FB, COMP, and ISET to this GND, and connect this GND to power GND at a single
point for best noise immunity.
5
FB
Feedback Input. The voltage at this pin is regulated to 0.808V. Connect to the resistor
divider between output and GND to set the output voltage.
6
COMP
Error Amplifier Output. This pin is used to compensate the converter.
Enable Input. EN is pulled up to 5V with a 4μA current, and contains a precise 1.6V
7
EN
logic threshold. Drive this pin to a logic-high or leave unconnected to enable the IC.
Drive to a logic-low to disable the IC and enter shutdown mode.
8
ISET
Output Current Setting Pin. Connect a resistor from ISET to GND to program the
output current.
Exposed Pad
Heat Dissipation Pad. Connect this exposed pad to large ground copper area with
copper and vias.
Innovative PowerTM
-2-
www.active-semi.com
Copyright © 2013 Active-Semi, Inc.
Share Link: 