HMC400MS8(2003) データシートの表示（PDF） - Hittite Microwave

部品番号

コンポーネント説明

一致するリスト

HMC400MS8
(Rev.:2003)

HIGH IP3 GaAs MMIC MIXER, 1.7 - 2.2 GHz

Hittite Microwave 

v01.1003

MICROWAVE CORPORATION

Outline Drawing

HMC400MS8

HIGH IP3 GaAs MMIC

MIXER, 1.7 - 2.2 GHz

12

Pin Descriptions

Pin Number

Function

1

LO

NOTES:

1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED

PLASTIC SILICA AND SILICON IMPREGNATED.

2. LEAD MATERIAL: COPPER ALLOY

3 LEAD PLATING: Sn/Pb SOLDER

4. DIMENSIONS ARE IN INCHES [MILLIMETERS]

5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.

6. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.

7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED

TO THE PCB RF GROUND

Description

This pin is AC coupled & matched to 50 Ohms

from 1.4 to 2.2 GHz. Blocking capacitors are required if line

potential is not equal to 0V.

Interface Schematic

2, 4

3, 6, 7

5

N/C

GND

IF Port

Not connected.

This pin must be connected to RF ground.

This pin is DC coupled. For applications not requiring

operation to DC this port should be DC blocked externally

using a series capacitor. Choose value of capacitor to pass

IF frequency desired. For operation to DC, this pin must not

sink/source more than 40 mA of current or failure may result.

8

RF Port

This pin is DC coupled & matched to 50 Ohm

from 1.7 to 2.2 GHz

12 - 216

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order Online at www.hittite.com

Share Link: