BD9486F データシートの表示（PDF） - ROHM Semiconductor

部品番号

コンポーネント説明

一致するリスト

BD9486F

1ch Boost up type White LED Driver for large LCD

ROHM Semiconductor 

BD9486F

3.5.4 Soft Start Function

STB

PWM

UVLO

VCCUVLO

REG50UVLO

OVP

RT

2.0V

SS

Datasheet

2.7V

3.0V

7.2V

7.5V

2.3V

2.6V

3.0V

2.8V

4clk

(*1)

(*2)(*3) (*4)

(*5)

(*6)

(*7)

Figure 35. Soft Start Function

(*1)…The SS pin charge does not start by just STB=H. PWM=H is required to start the soft start. In the low SS voltage, the

GATE pin duty depends on the SS voltage. And while the SS is less than 0.4V, the pulse does not output.

(*2)…By the time STB=L, the SS pin is discharged immediately. As REG50UVLO=H, RT is still High.

(*3)…As the STB recovered to STB=H, The SS charge starts immediately by the logic PWM=H in this chart.

(*4)…The SS pin is discharged immediately by the UVLO=L.

(*5)…The SS pin is discharged immediately by the VCCUVLO=L.

(*6)…The SS pin is discharged immediately by the REG50UVLO=L.

(*7)…The SS pin is not discharged by the abnormal detection of the latch off type such as OVP until the latch off.

www.rohm.com

© 2013 ROHM Co., Ltd. All rights reserved.

TSZ22111・15・001

26/34

TSZ02201-0F1F0C100240-1-2

13.Feb.2014 Rev.004

Share Link: