SHIELD-EKG-EMG データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

一致するリスト

SHIELD-EKG-EMG

SHIELD-EKG-EMG bio-feedback shield

Unspecified 

OLIMEX© 2014

SHIELD-EKG-EMG user's manual

SECTION 1 OVERVIEW

Thank you for choosing the SHIELD-EKG-EMG prototype board from Olimex! This

document provides a User’s Guide for the Olimex SHIELD-EKG-EMG. As an overview, this

chapter gives the scope of this document and lists the board’s features. The document’s

organization is then detailed.

1.1 Scope

The SHIELD-EKG-EMG is an extension module for Olimex's ARDUINO compatible boards

– like OLIMEXINO-328, OLIMEXINO-STM32 and PIC32-PINGUINO, among others. The

shield is also compatible with ARDUINO boards including ARDUINO UNO. The board

comes with mounted connectors on it.

1.2 Features

 Suitable for electrocardiography – monitoring and data collection

 Suitable for electromyography – monitoring and data collection

 Stackable shield (pass-through headers) - up to 6 shields forming 6 channels; mounted

on top of each other and wired to A0-A6 analogue inputs

 Open hardware, open software project – users have access to all design documents

 Calibration signal generation by D4/D9 digital output

 Precise trimmer potentiometer for calibration (all boards are shipped completely as-

sembled, tested and calibrated so you should not do this unless you wat to see how

things work)

 Input connector for passive or active electrodes

 Works with both 3.3V and 5V Arduino boards

 Available examples for Arduino, Pinguino and Maple

Please note that the unit can be used for electroencephalography to some extent, however such

use is not intended by design. The design doesn't provide the accuracy required for proper

EEG and if you are interested in this field, please, consider the EEG-SMT board.

1.3 Similar boards

EEG-SMT – an inexpensive unit specifically designed for electroencephalography (EEG) -

recording of electrical activity along the scalp (brain activity):

https://www.olimex.com/Products/EEG/OpenEEG/EEG-SMT/

PROTO-SHIELD – If you seek a board which follows the DUINO shield dimensions

specification and offers prototype area and 2 buttons with filter capacitors and 2 LEDs. Web

page of the product: https://www.olimex.com/Products/Duino/Shields/PROTO-SHIELD/

SHIELD-LOL – If you are searching for a shield with 126 LED matrix (14×9) available in 4

colors and 4 different sizes of the LEDs. Web page:

https://www.olimex.com/Products/Duino/Shields/SHIELD-LOL/

Page 5 of 20

Share Link: