DF17(1.0H)-26DP-0.5V データシートの表示（PDF） - HIROSE ELECTRIC
部品番号
コンポーネント説明
一致するリスト
DF17(1.0H)-26DP-0.5V Datasheet PDF : 9 Pages
| |||
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHDS pFr1od7ucStsehraievesbqee0n.d5ismcomntinPueidtc, ohr wBillobaerddisctoontiBnuoedasrodonC. Polenasneecchetcokrthe products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
s Precautions
Temperature (ç)
250
200
150 150ç
250ç
220ç
180ç
60sec max
Soldering
1. Recommended
Temperature Profile
(SMT)
100
50
Room temperature
90~120sec
Preheating
0
50
100
150
200
250
300
Time (sec.)
Note1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that
there is a return to normal temperature between the first and second cycle.
Note2: The temperature profile indicates the board surface temperature at the point of contacts
with the connector terminals.
2. Recommended Manual
Soldering Condition
(SMT)
Soldering iron temperature: 350±3çoldering time: Within 2 seconds
3. Recommended
Screen Thickness
(SMT)
0.15mm
4. Board Warp(SMT)
Max 0.02mm in the connector center area, based on the both connector edges
5. Cleaning Condition
Refer to the "Nylon Connector Use Hand book".
6. Cautions
s The header is designed in a structure where contacts are exposed. Touching it with bare
hands would cause contact failure or electrostatic element damage.
s Where no board is mounted, the insertion or extraction will cause damage or contact deformation.
s Avoid retaining the board with the connector only, and fix the board by any other means than the connector.
s Excessive scoop insertion or extraction may result in damage.
s In the manual soldering process, don't carry out the flux coating which will cause a flux blister on the connector.
s The color phase of this product may be slightly different from that of the formed product
according to the manufacturing lot. However, the difference doesn't affect the performance.
A192
Share Link: 