MIKROE-598 データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

一致するリスト

MIKROE-598

8051 BIG8051 DEVELOPMENT SYSTEM

Unspecified 

BIG8051

7

2.0. C8051F040 microcontroller

The BIG8051 development system comes with a 100-pin microcontroller C8051F040 in TQFP package. The

microcontroller is soldered on the MCU card. It’s key features are as follows:

- Pipelined instruction architecture executes 70% of instruction set in 1 or 2 system clocks;

- Up to 25 MIPS throughput with 25 MHz clock;

- 4352 bytes internal data RAM (4 k + 256);

- 64 kB Flash; in-system programmable in 512-byte sectors;

- Bosch Controller Area Network (CAN 2.0B), hardware SMBus™ (I2C™ Compatible), SPI™, and two UART

serial ports available concurrently;

- Internal calibrated programmable oscillator: 3 to 24.5 MHz; etc.

)LJXUHMicrocontroller C8051F040

)LJXUHMicrocontroller’s pinout

The microcontroller provided on the development system can be easily replaced with another one. When choosing another

microcontroller, it is very important to compare its and C8051F040’s pinouts to make sure that they are compatible. If

you use a microcontroller with different pinout, some on-board modules will probably not work. Anyway, if you decide to

use another microcontroller, it is also necessary to provide an MCU card to solder the new microcontroller on.

MikroElektronika

Share Link: