AP1685 データシートの表示（PDF） - Diodes Incorporated.
部品番号
コンポーネント説明
一致するリスト
AP1685 Datasheet PDF : 14 Pages
| |||
A Product Line of
Diodes Incorporated
AP1685
Description
OFFLINE, HIGH PF, HIGH EFFICIENCY LED DRIVER IC
Pin Assignments
The AP1685 is a high performance AC/DC power factor corrector for
mains dimmable LED driver applications. The device uses Pulse
Frequency Modulation (PFM) technology to regulate output current
while achieving high power factor and low THD. It operates as a BCM
(Boundary Conduction Mode) which is good for EMI.
(Top View)
S1
7 Drain
The AP1685 internally integrates a 500V high voltage MOSFET which
can realize a lower BOM cost. The AP1685 provides accurate
constant current (CC) regulation while removing the opto-coupler and
secondary control circuitry. It also eliminates the need of loop
compensation circuitry while maintaining stability. It can meet the
requirement of IEC6100-3-2 harmonic standard.
The AP1685 features low start-up current, low operation current. It
adopts valley on switching mode to achieve high efficiency. It also has
rich protection features including over voltage, short circuit, over
temperature protection.
The AP1685 is available in SO-7 package.
Applications
Non-dimmable LED drivers
CS 2
RI 3
GND 4
6 VCC
5 FB
SO-7
Features
Boundary Conduction Mode (BCM) Operation to Achieve High-
efficiency
High PF and Low THD (PF>0.9, THD<30%)
High Efficiency
Low Start-up Current
Tight LED Current
Tight LED Open Voltage
Valley-mode Switching to Minimize the Transition Loss
Internal Integrated 2.5A/500V MOSFET can Cover up to 10W
Easy EMI
Internal Protections:
Under Voltage Lock Out (UVLO)
Leading-edge Blanking (LEB)
Output Short Protection
Output Open Protection
Over Temperature Protection
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
AP1685
Document number: DS37311 Rev. 1 - 2
1 of 14
www.diodes.com
September 2014
© Diodes Incorporated
Share Link: 