JW1SN-DC5V-F データシートの表示（PDF） - Panasonic Corporation
部品番号
コンポーネント説明
一致するリスト
JW1SN-DC5V-F Datasheet PDF : 5 Pages
| |||
JW
VDE
JW RELAYS COMPACT PC BOARD
POWER RELAY
FEATURES
28.6
1.126
12.8
.504
• Miniature package with universal
terminal footprint
• High dielectric withstanding for
transient protection:
20.0
.787
10,000 V surge in µs between coil and
contact
• Sealed construction
• Class B coil insulation types
available
mm inch • TV rated (TV-5) types available
(only for 1 Form A type)
• VDE, TÜV, SEMKO, SEV, FIMKO, TV-5
also approved
Compliance with RoHS Directive
About Cd-free contacts
We have introduced Cadmium free type
products to reduce Environmental
Hazardous Substances.
(The suffix “F” should be added to the
part number)
(Note : The Suffix “F” is required only for
1 Form A contact type. The 1 Form C and
2 Form A and 2 Form C contact type is
originally Cadmium free, the suffix “F” is
not required.)
Please replace parts containing
Cadmium with Cadmium-free products
and evaluate them with your actual
application before use because the life of
a relay depends on the contact material
and load.
SPECIFICATIONS
Contact
Arrangement
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
Contact material
Rating
(resistive
load)
Expected
life (min.
ope.)
Nominal switching
capacity
Max. switching power
Max. switching voltage
Max. switching current
Min. switching
capacity#1
(Reference value)
Mechanical
(at 180 cpm)
Electrical (at 6 cpm)
(Resistive load)
Standard type
High capacity type
1 Form A, 1 Form C,
2 Form A, 2 Form C
1 Form A, 1 Form C
100 mΩ
1a: AgSnO2 type
1c, 2a, 2c: AgNi type
5 A 250 V AC,
5 A 30 V DC
10 A 250 V AC,
10 A 30 V DC
1,250 VA, 150 W
2,500 VA, 300 W
250 V AC, 30 V DC
5A
10 A
100 mA, 5 V DC
5×106
105
Coil
Nominal operating power
530 mW
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Detection current: 10mA
*2 Wave is standard shock voltage of ±1.2 × 50µs according to JEC-212-1981
*3 Excluding contact bounce time
*4 Half-wave pulse of sine wave: 11ms; detection time: 10µs
*5 Half-wave pulse of sine wave: 6ms
*6 Detection time: 10µs
*7 Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT.
*8 The pick-up and drop out voltages rise approximately 0.4% for every 1°C 33.8°F
given a standard ambient temperature of 20°C 68°F. Therefore, when using relays
where the ambient temperature is high, please take into consideration the rise in
pick-up and drop out voltages and keep the coil applied voltage within the
maximum allowable voltage.
Characteristics
Standard type High capacity type
Max. operating speed
(at rated load)
Initial insulation resistance
6 cpm
Min. 1,000 MΩ at 500 V DC
Initial
breakdown
voltage*1
Between open
contacts
Between contacts and
coil
Between contact sets
1,000 Vrms for 1 min.
5,000 Vrms for 1 min.
3,000 Vrms for 1 min.
(2 Form A, 2 Form C)
Initial surge voltage between
contacts and coil*2
10,000 V
Operate time*3
(at nominal voltage)
Max. 15 ms
Release time (without diode)*3
(at nominal voltage)
Temperature rise (at 20°C)
(at nominal voltage)
(with nominal coil voltage and at
nominal switching capacity)
Max. 5 ms
1a: max. 45°C
1c, 2a, 2c:
max. 55°C
(resistance method)
1a: max. 45°C
1c: max. 55°C
(resistance method)
Shock
Functional*4
resistance Destructive*5
98 m/s2 {10 G}
980 m/s2 {100 G}
Vibration Functional*6
resistance Destructive
Conditions for operation,
transport and storage*7
(Not freezing and
condensing at low
temperature)
Ambient
temp.*8
Humidity
10 to 55 Hz at double amplitude of 1.6 mm
10 to 55 Hz at double amplitude of 2.0 mm
–40°C to +60°C –40°F to 140°F (Class E),
(Class B: –40°C to +85°C –40°F to 185°F)
5 to 85% R.H.
Unit weight
Approx. 13 g .46 oz
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
Share Link: 