ICE3BR4765JZ データシートの表示（PDF） - Infineon Technologies

部品番号

コンポーネント説明

一致するリスト

ICE3BR4765JZ

Off-Line SMPS Current Mode Controller with integrated 650V CoolMOS® and Startup cell (frequency jitter Mode) in DIP-7

Infineon Technologies 

ICE3BR4765JZ

Input Power Curve

6 Input Power Curve

Two input power curves giving the typical input power versus ambient temperature are showed below;

Vin=85Vac~265Vac (Figure 31) and Vin=230Vac+/-15% (Figure 32). The curves are derived based on a typical

discontinuous mode flyback model which considers either 50% maximum duty ratio or 100V maximum secondary

to primary reflected voltage (higher priority). The calculation is based on no copper area as heatsink for the device.

The input power already includes the power loss at input common mode choke, bridge rectifier and the

CoolMOS.The device saturation current (ID_Puls @ Tj=125°C) is also considered.

To estimate the output power of the device, it is simply multiplying the input power at a particular operating ambient

temperature with the estimated efficiency for the application. For example, a wide range input voltage (Figure 31),

operating temperature is 50°C, estimated efficiency is 85%, then the estimated output power is 15W (17.7W *

85%).

Figure 31 Input power curve Vin=85~265Vac; Pin=f(Ta)

Figure 32 Input power curve Vin=230Vac+/-15%; Pin=f(Ta)

Version 2.1

26

30 Aug 2011

Share Link: