SP-320-12 データシートの表示（PDF） - Mean Well Enterprises Co., Ltd.
部品番号
コンポーネント説明
一致するリスト
SP-320-12 Datasheet PDF : 2 Pages
| |||
320W Single Output with PFC Function
SP-320 series
Features :
Universal AC input / Full range
Built-in active PFC function, PF>0.95
Protections: Short circuit / Overload / Over voltage / Over temperature
Forced air cooling by built-in DC Fan
Built-in fan speed control
Fixed switching frequency at 100KHz
3 years warranty
SPECIFICATION
(except for 3.3V, 36V)
MODEL
SP-320-3.3 SP-320-5 SP-320-7.5 SP-320-12 SP-320-13.5 SP-320-15 SP-320-24 SP-320-27 SP-320-36 SP-320-48
OUTPUT
DC VOLTAGE
3.3V
5V
7.5V
12V
13.5V
15V
24V
27V
36V
48V
RATED CURRENT
55A
55A
40A
25A
22A
20A
13A
11.7A
8.8A
6.7A
CURRENT RANGE
0 ~ 60A 0 ~ 55A 0 ~ 40A 0 ~ 25A 0 ~ 22A 0 ~ 20A 0 ~ 13A 0 ~ 11.7A 0 ~ 8.8A 0 ~ 6.7A
RATED POWER
181.5W 275W
300W
300W
297W
300W
312W
315.9W 316.8W 321.6W
RIPPLE & NOISE (max.) Note.2 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 220mVp-p 240mVp-p
VOLTAGE ADJ. RANGE
3.14 ~ 3.63V 4.5 ~ 5.5V 6 ~ 9V
10 ~ 13.2V 12 ~ 15V 13.5 ~ 18V 20 ~ 26.4V 26 ~ 31.5V 32.4 ~ 39.6V 41 ~ 56V
VOLTAGE TOLERANCE Note.3 1.0%
2.0%
2.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LINE REGULATION
0.5%
0.5%
0.5%
0.3%
0.3%
0.3%
0.2%
0.2%
0.2%
0.2%
LOAD REGULATION
1.5%
1.0%
1.0%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
SETUP, RISE TIME
800ms, 50ms/230VAC 2500ms, 50ms/115VAC at full load
HOLD UP TIME (Typ.)
16ms/230VAC 16ms/115VAC at full load
VOLTAGE RANGE Note.5 88 ~ 264VAC 124 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.95/230VAC PF>0.98/115VAC at full load
EFFICIENCY (Typ.)
74%
79%
83%
86%
86%
86%
87%
88%
87%
89%
INPUT
AC CURRENT 115VAC 2.5A
5A
(Typ.)
230VAC 1.5A
2.5A
INRUSH CURRENT (Typ.) 20A/115VAC 40A/230VAC
LEAKAGE CURRENT
<1mA / 240VAC
OVERLOAD
105 ~ 135% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
PROTECTION OVER VOLTAGE
3.8 ~ 4.5V 5.75 ~ 6.75V 9.4 ~ 10.9V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V
Protection type : Shut down o/p voltage, re-power on to recover
27.6 ~ 32.4V 33.7 ~ 39.2V 45 ~ 52.5V 57.6 ~ 67.2V
OVER TEMPERATURE
80 5 (70 5 3.3V,5V only) (TSW1 : detect on heatsink of power transistor)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
WORKING TEMP.
-20 ~ +65 (Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.03%/ (0 ~ 50
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY STANDARDS
UL60950-1, TUV EN60950-1, CCC GB4943(except for 3.3V, 36V) approved
SAFETY & WITHSTAND VOLTAGE
EMC
ISOLATION RESISTANCE
(Note 4) EMC EMISSION
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
EMC IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
MTBF
207K hrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION
PACKING
215*115*50mm (L*W*H)
1.1Kg; 12pcs/14Kg/0.92CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:SP-320-SPEC 2011-08-23
Share Link: 