CMR03E430JOCR データシートの表示（PDF） - Cornell Dubilier Electronics
部品番号
コンポーネント説明
一致するリスト
CMR03E430JOCR Datasheet PDF : 6 Pages
| |||
Type CMR , High-Reliability, Mica Capacitors
Moisture Resistance: Capacitors
will meet the requirements of
MIL-STD-202, Method 106F as outlined
here and diagrammed on the
right. Apply 100 V or the rated voltage
(whichever is less) to half of the
capacitors. Don’t apply voltage to
the other half. Refer to MIL-STD-
202 for details.
1. Dry capacitors for 24 hours in a
50±2 °C oven and then allow to
stabilize at room temperature.
2. Subject the capacitors to 20 24-
hour continuous cycles with
relative humidity and temperature
as shown.
3. 4 to 24 hours after completion of
the last cycle the capacitors will
show no visual damage and will
meet the after-test limits below.
After-Test Limits
Test
Moisture Resistance
Life Test
Solder Heat
Withstand
Voltage
IL
IL
IL
Insulation
Resistance
30 GΩ
IL
IL
Capacitance Change DF
Q
(whichever is greater)
NV±1% or ±1 pF 150% IL 2/3xIL
NV±1% or ±1 pF 150% IL 2/3xIL
IV±5% or ±5pF
IL
IL
IL=Initial Limit NV=Nominal Value IV=Initial Value
Ordering Information
Order by complete part number, as below.
For other options, write your requirements on your quote request.
Part Numbering System
CMR05 C
100
J
P
CDE
Capacitance Capacitance
Type
1R0 = 1.0pF Tolerance
361 = 360pF D = ±.5 pf
122 = 1200pF F = ±1%
G = ±2%
Characteristic
J = ±5%
Temperature Range
O = –55 °C to +125 °C
P = –55 °C to +150 °C*
D
Voltage
Y = 50 Vdc
A = 100 Vdc
C = 300 Vdc
D = 500 Vdc
R
Failure Rate
M = 1.0%/1000 hrs.
P = .1%/1000 hrs.
R = .01%/1000 hrs.
Temp. Coeff.
ppm/°C
C –200 to +200
E –20 to +100
F
0 to + 70
CapacitanceDrift
±(0.5% +0.1pF)
±(0.1% +0.1pF)
±(0.05% +0.1pF)
Standard
Cap. Range
1 – 18 pF
20 – 82 pF
91 pF and up
*P temperature range available for CMR04, CMR05, CMR06, CMR07, CMR08
CDE Cornell Dubilier•1605 E. Rodney French Blvd.•New Bedford, MA 02744•Ph: (508)996-8564•Fax: (508)996-3830• www.cde.com
Share Link: 