Photo Link Module
zTerminal description
Pin No Terminal
1
LEDA
2
TX-RC
Circuit
1
LED
VCC
240k
3
TXD
VCC
240k
4
RXD
PWDOWN
VCC
300k
VCC
5
PWDOWN
6
VCC
7
GND
− Shield Case
RPM841-H11
Function
LED ANODE Terminal
Other power source can be used
difference between LEDVCC and VCC.
RC Transmitting Data Input Terminal
H : LED Emitting (Remote Control Mode)
CMOS Logic Level Input
Holding TX-RC='H' status, LED will be
turn off approximately 48µs.
Transmitting Data Input Terminal
TXD input at PWDOWN=L
H : LED Emitting
CMOS Logic Level Input
Holding TXD="H" status, LED will be
turn off approximately 48µs.
Receiving Data Output Terminal
CMOS Logic Level Output
When PWDOWN (5pin)= 'H', the RXD
output will be pulled up to VCC at
approximately 300kΩ.
Power-down Control Terminal
H : POWERDOWN
L : OPERATION
CMOS Logic Level Input
When input is 'H', it will stop the receiving
circuit and Pin-PD current.
Power Supply Terminal
For preventing from infection, connect
a capacitor between VCC (6pin) and
GND (7pin).
Ground Termianl
Connect to Ground.
3/9