STEVAL-ISA042V1 データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

一致するリスト

STEVAL-ISA042V1

1.5 A / 1.2 V step-down DC-DC converter demonstration board based on the ST1S03

STMicroelectronics 

STEVAL-ISA042V1

1.5 A / 1.2 V step-down DC-DC converter demonstration board

based on the ST1S03

Data brief

as the use of a resistor divider to set the output

voltage value. Only an inductor, a Schottky diode,

and two capacitors are required. In addition, a low

output ripple is guaranteed by the current-mode

PWM topology and by the use of low ESR SMD

ceramic capacitors. It is thermally protected and

current limited to prevent damage due to

accidental short-circuits.

The ST1S03 is available in a DFN6 (3x3 mm)

package.

STEVAL-ISA042V1

Features

• Adjustable current-mode PWM step-down DC-

DC converter

• Output voltage, Vout: 1.2 V

• Output current, Iout: 1.5 A

• Internal compensation to eliminate additional

components

• Pulse skipping for Iout lower than 15 mA, to

maintain the regulation with light loads

• RoHS compliant

Description

The STEVAL-ISA042V1 demonstration board is a

step-down DC-DC converter based on ST’s

ST1S03 switching regulator, optimized for

powering the low-voltage digital core in HDD

applications and, more generally, replacing the

high-current linear solution when the power

dissipation may cause excessive heating of the

application environment. It provides up to 1.5 A

over an input voltage range of 3 V to 16 V.

A high switching frequency (1.5 MHz) allows the

use of tiny surface-mounted components, as well

May 2013

DocID024676 Rev 1

For further information contact your local STMicroelectronics sales office.

1/4

www.st.com

4

Share Link: