TWR-K60F120M データシートの表示（PDF） - Freescale Semiconductor

部品番号

コンポーネント説明

一致するリスト

TWR-K60F120M

High-Performance MCUs with Connectivity and Security

Freescale Semiconductor 

TOWER SYSTEM

Step-by-Step Installation Instructions

1 Install the

Software and Tools

Install the P&E Micro Kinetis Tower

Toolkit. The Toolkit includes the

OSJTAG and USB-to-serial drivers.

These can be found on the DVD

under Software.

3 Tilt the

Board

Tilt the board side to side to see

the LEDs on E1–E4 light up as it is

tilted. While the board is held flat,

touch the pads on E1–E4 to

toggle the LEDs.

2 Configure the

Hardware

Install the included battery into the

VBAT (RTC) battery holder. Then,

connect one end of the USB cable

to the PC and the other end to the

power/OSJTAG mini-B connector

on the TWR-K60F120M module.

Allow the PC to automatically

configure the USB drivers if needed.

4 Play the

Memory Game

Press SW2 to play a memory recall

game using the touch pads E1–E4.

A sequence will light up, then press

the touch pads in the order flashed.

If an incorrect sequence is touched

or too much time has elapsed,

the LEDs will blink rapidly and the

game will reset.

Press SW1 to return to the

accelerometer demo.

5

Share Link: