MC10H176
APPLICATION INFORMATION
The MC10H176 contains six high–speed, master slave
type “D” flip–flops. Data is entered into the master when
the clock is low. Master–to–slave data transfer takes
place on the positive–going Clock transition. Thus,
outputs may change only on a positive–going Clock
transition. A change in the information present at the data
(D) input will not affect the output information any other
time due to the master–slave construction of this device.
LOGIC DIAGRAM
D0
5
2 Q0
D1
6
3 Q1
D2
7
4 Q2
D3 10
13 Q3
D4 11
14 Q4
D5 12
CLOCK 9
VCC1 = PIN 1
VCC2 = PIN 16
VEE = PIN 8
15 Q5
MOTOROLA
2–114
MECL Data
DL122 — Rev 6