RF3000 データシートの表示（PDF） - RF Micro Devices
部品番号
コンポーネント説明
一致するリスト
RF3000 Datasheet PDF : 28 Pages
| |||
RF3000
Register 0x06 - RX Length Field LSB’s (Read only)
RX_LN7
RX_LN6
RX_LN5
RX_LN4
RX_LN3
The lower byte of the length field received.
RX_LN2
RX_LN1
RX_LN0
Register 0x07 - RX Service Field (Read only)
RX_SER7 RX_SER6 RX_SER5 RX_SER4 RX_SER3 RX_SER2
This register is used per IEEE802.11b specification.
RX_SER7 is length field extension in high data rate proposal 802.11b.
RX_SER3 is modulation selection bit for high rate transmission.
0 - CCK
RX_SER2 signifies Synth Clock to Signal Clock per 802.11 specification.
RX_SER1
RX_SER0
Register 0x08 - Reserved
Register 0x09 - Reserved
Register 0x0A - Reserved
Register 0x0B - Reserved
Register 0x0C - Reserved
Register 0x0D - Reserved
Register 0x0E - Reserved
Register 0x0F - Reserved
Register 0x10 - Reserved
Register 0x11 - TX Variable Gain and TX Length Field Extension
TXVGC5 TXVGC4 TXVGC3 TXVGC2 TXVGC1 TXVGC0
TXVGC5-TXVGC0 - Gain setting for transmission.
000000 - Min gain
111111 - Max gain
SCRAMBLER
TX_LN16
SCRAMBLER - This bit enables and disables the IEEE802.11b data scrambler.
Bit Value Scrambler Mode
0
Enabled
1
Disabled
TX_LN16 - TX length extension bit as defined in IEEE 802.11b specification.
Register 0x12 - TX Length Field MSB’s
TX_LN15 TX_LN14 TX_LN13 TX_LN12 TX_LN11 TX_LN10 TX_LN9
TX_LN8
Register 0x13 - TX Length Field LSB’s
TX_LN7
TX_LN6
TX_LN5
TX_LN4
TX_LN3
TX_LN2
TX_LN1
TX_LN0
Registers 0x12 and 0x13 indicate the number of microseconds that the RF3000 is to transmit after receiving a request to
start transmission.
11-342
Rev A4 031216
Share Link: 