PN511 データシートの表示（PDF） - NXP Semiconductors.

部品番号

コンポーネント説明

一致するリスト

PN511

Transmission Module

NXP Semiconductors. 

NXP Semiconductors

PN511

Transmission Module

8.1.2 FeliCa reader/writer functionality

The FeliCa mode is the general reader/writer to card communication scheme according to

the FeliCa specification. The following diagram describes the communication on a

physical level, the communication overview describes the physical parameters.

FeliCa Reader

(PCD)

1. PCD to PICC 8-30 % ASK

,Manchester Coded,

baudrate 212 to 424 kbaud

FeliCa Card

(PICC)

PN511

2. PICC to PCD, >12 % ASK Loadmodulatio,n

Manchester Coded,

baudrate 212 to 424 kbaud

Fig 7. FeliCa reader/writer Communication Diagram

Table 6. Communication overview for FeliCa reader/writer

Communication

direction

FeliCa

Transfer speed

212 kbit/s

PN511 → card Modulation on reader side

8-30% ASK

bit coding

Manchester Coding

Bitlength

(64/13.56) μs

card → PN511 Loadmodulation on card side >12% ASK

bit coding

Manchester coding

FeliCa Higher

transfer speeds

424 kbit/s

8-30% ASK

Manchester Coding

(32/13.56) μs

>12% ASK

Manchester coding

The contactless UART of PN511 and a dedicated external host controller are required to

handle the complete FeliCa protocol.

8.1.2.1 FeliCa framing and coding

Table 7. FeliCa framing and coding

Preamble

Sync Len

00h 00h 00h 00h 00h 00h B2h 4Dh

n-Data

CRC

To enable the FeliCa communication a 6 byte preamble (00h, 00h, 00h, 00h, 00h, 00h)

and 2 bytes Sync bytes (B2h, 4Dh) are sent to synchronize the receiver.

The following Len byte indicates the length of the sent data bytes plus the LEN byte itself.

The CRC calculation is done according to the FeliCa definitions with the MSB first.

To transmit data on the RF interface, the host controller has to send the Len- and data-

bytes to the PN511's FIFO buffer. The preamble and the sync bytes are generated by the

PN511 automatically and must not be written to the FIFO by the host controller. The

PN511 performs internally the CRC calculation and adds the result to the data frame.

Example for FeliCa CRC Calculation:

Table 8. Start Value for the CRC Polynomial: (00h), (00h)

Preamble

Sync

Len

00h 00h 00h 00h 00h 00h B2h 4Dh 03h

2 Data Bytes

ABh CDh

CRC

90h 35h

082733

Product short data sheet

Rev. 3.3 — 13 June 2007

© NXP B.V. 2007. All rights reserved.

12 of 22

Share Link: