datasheetbank_Logo
データシート検索エンジンとフリーデータシート

AX88796L データシートの表示(PDF) - Unspecified

部品番号
コンポーネント説明
メーカー
AX88796L Datasheet PDF : 71 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
AX88796 L
3-in-1 Local Bus Fast Ethernet Controller
32-bit CRC Generator
X=31 to X=26
Clock
Latch
1 of 64 bit decoder
Filter bit array
Selected bit
0 = reject, 1= accept
If address Y is found to hash to the value 32 (20H), then FB32 in MAR2 should be initialized to ``1''. This will cause the
AX88796 to accept any multicast packet with the address Y.
Although the hashing algorithm does not guarantee perfect filtering of multicast address, it will perfectly filter up to 64
logical address filteres if these addresses are chosen to map into unique locations in the multicast filter.
Note: The first bit of received packet sequence is 1’s stands by Multicast Address.
4.1.3 Broadcast Address Match Filter
The Broadcast check logic compares the Destination Address Field (first 6 bytes of the received packet) to all 1’s, that is
the values are “FF FF FF FF FF FF FF” in Hex format. If any bit of the six bytes does not equal to 1’s, the Protocol Control
Logic rejects the packet.
4.1.4 Aggregate Address Filter with Receive Configuration Setup
The final address filter decision depands on the destination address types, identified by the above 3 address
match filters, and the setup of parameters of Receive Configuration Register.
Definitions of address match filter result are as following:
Signal Value
Description
Phy
=1
Unicast Address Match
=0
Unicast Address not Match
Mul
=1
Multicast Address Match
=0
Multicast Address not Match
Bro
=1
Brocast Address Match
=0
Brocast Address not Match
AGG =1
Aggregate Address Match
=0
Aggregate Address not Match
The meaning of AB, AM and PRO signals, please refer to “Receive Configuration Register”
20
ASIX ELECTRONICS CORPORATION

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]