AAT4250 データシートの表示（PDF） - Analog Technology Inc

部品番号

コンポーネント説明

一致するリスト

AAT4250

Slew Rate Controlled Load Switch

Analog Technology Inc 

AAT4250

Slew Rate Controlled Load Switch

Printed Circuit Board Layout

Recommendations

For proper thermal management, and to take

advantage of the low RDSON of the AAT4250, a few

circuit board layout rules should be followed: Vin

and Vout should be routed using wider than normal

traces, and GND should be connected to a ground

plane. For best performance, CIN and COUT should

be placed close to the package pins.

Evaluation Board Layout

The AAT4250 evaluation layout follows the printed

circuit board layout recommendations, and can be

used for good applications layout.

Note: Board layout shown is not to scale.

Figure 1: Evaluation board

top side silk screen layout /

assembly drawing

Figure 2: Evaluation board

component side layout

Figure 3: Evaluation board

solder side layout

10

4250.2001.12.0.94

Share Link: