XRT83SH314 データシートの表示（PDF） - Exar Corporation

部品番号

コンポーネント説明

メーカー

XRT83SH314

14-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT

Exar Corporation 

XRT83SH314

REV. 1.0.4

14-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT

2.1.2 CASE 2: Internal Termination With One External Fixed Resistor for All Modes

Along with the internal termination, a high precision external fixed resistor can be used to optimize the return

loss. This external resistor can be used for all modes of operation ensuring one bill of materials. There are

three resistor values that can be used by setting the RxRES[1:0] bits in the appropriate channel register.

Selecting the value for the external fixed resistor is shown in Table 3.

TABLE 3: SELECTING THE VALUE OF THE EXTERNAL FIXED RESISTOR

RXRES[1:0]

EXTERNAL FIXED RESISTOR

0h (00)

None

1h (01)

240Ω

2h (10)

210Ω

3h (11)

150Ω

By default, RxRES[1:0] is set to "None" for no external fixed resistor. If an external fixed resistor is used, the

XRT83SH314 uses the parallel combination of the external fixed resistor and the internal termination as the

input impedance. See Figure 5 for a typical connection diagram using the external fixed resistor.

NOTE: Without the external resistor, the XRT83SH314 meets all return loss specifications. This mode was created to add

flexibility for optimizing return loss by using a high precision external resistor.

FIGURE 5. TYPICAL CONNECTION DIAGRAM USING ONE EXTERNAL FIXED RESISTOR

XRT83SH314 LIU

RTIP

Receiver

Input

RRING

Internal Impedance

1:1

R

Line Interface T1/E1/J1

R=240Ω, 210Ω, or 150Ω

17

Share Link: