TORX111 データシートの表示（PDF） - Toshiba

部品番号

コンポーネント説明

一致するリスト

TORX111

FIBER OPTIC RECEIVING MODULE

Toshiba 

TORX111

(10) Shielding and wiring pattern of fiber optic receiving modules

To shield, connect the fixed pins (pins 5 and 6) of fiber optic transceiving module TORX111 to the

GND.

Where the fiber optic receiving module uses metal material, be careful that the case does not touch

wiring (including land).

To improve noise resistance, shield the optical module and the power line filter using a metallic cover.

(11) Supply voltage

Use the supply voltage within the recommended operating condition (VCC = 5 ± 0.25 V). Make sure

that supply voltage does not exceed the maximum rating value of 7 V, even for an instant.

(12) Output

If the receiver output is at low and is connected to the power supply, or if the output is high and is

connected to GND, the internal IC may be destroyed.

(13) Analogue Output

Pin No.2, fiber optic receiving module TORX111, is analog output terminal for observing the received

optical power as a result of measuring analog output voltage.

When LED or other devices connect to analog output, use the buffer circuit.

When analog output terminal is not used, do not connect any circuit to it.

(14) Soldering condition

Solder at 260°C or less for no more than three seconds.

(15) Precautions when disposing of devices and packing materials.

When disposing devices and packing materials, follow the procedures stipulated by local regulations

in order to protect the environment against contamination.

When devices are disposed of, worker safety and protection of the environment must be taken into

account.

(16) Precautions during use

Toshiba is continually working to improve the quality and the reliability of their products.

Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical

sensitivity and their vulnerability to physical stress. It is the responsibility of the buyer, when

utilizing Toshiba products, to observe standards of safety, and to avoid situations in which the

malfunction or failure of a Toshiba product could cause loss of human life, bodily injury or damage to

property.

When developing equipment, please ensure that Toshiba products are used within the specified

operating ranges set forth in the most recent product specifications. Also, please keep in mind the

precautions and conditions set forth in the Toshiba Semiconductor Reliability Handbook.

8

2001-08-31

Share Link: