SMS12SE3 データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

一致するリスト

SMS12SE3

Quick mating panel and cable connectors

Unspecified 

SMS – Quick mating

Accessories for standard Quick mating connectors

Pin protection shroud for panel mount receptacle (SMS--CSB1)

When pins are inserted into the panelmount

receptacle half (SMS--R1) of the Quick

mating connector, an optional pin

protection shroud can be installed.

The shroud is mounted at the same time

as the receptacle by holding the shroud

against the mating side of the panel with

both cutouts lined up. The receptacle is

then inserted in place, trapping the shroud

between the receptacle and panel. The use

of the pin protection shroud reduces the

allowable thickness of the panel from 2.3 to

1.6 mm max.

Strain relief hoods

(SMS—H1)

Part number

SMS2CSB1

SMS3CSB1

SMS4CSB1

SMS6CSB1

SMS9CSB1

SMS12CSB1

SMS15CSB1

SMS18CSB1

SMS24CSB1

SMS36CSB1

Number of contact

positions

2

3

4

6

9

12

15

18

24

36

A

19.8

23.4

28.4

23.4

28.4

54.1

B

18.8

23.9

29.0

34.0

39.1

44.2

34.0

Separate strain relief hoods are available for all standard plugs SMS—P1.

The hoods consist of identical halves that snap into position on the plug and are secured in

place with the cable tie drawn tightly around the cabe entry collar.

Catalog numbers designate a complete hood (2 halves) SMS—H1

The cable tie is not included (TF4D – TF5D)

Two three and four position hoods are single piece units

Discrimination pins

For discrimination pins on both standard Quick mating and Quick mating Pin Headers cable and boardmount:

See accessories section.

Share Link: