MGS-71008 データシートの表示（PDF） - HP => Agilent Technologies

部品番号

コンポーネント説明

一致するリスト

MGS-71008

Absorptive SPDT GaAs MMIC Switch

HP => Agilent Technologies 

Absorptive SPDT GaAs MMIC

Switch

Technical Data

MGS-71008

Features

• Single-Pole, Double-Throw

Output

• Broad Bandwidth:

DC to 3␣ GHz

• High Isolation:

37␣ dB␣ Typicalat1␣ GHz

• Fast Switching Time:

3␣ ns␣ Typical

• Ultra Low DC Power

Consumption

• Small Surface-Mount Plastic

Package

Description

The MGS-71008 is a single-pole,

double-throw monolithic GaAs

MMIC switch. The J2 and J3 of the

MGS-71008 are terminated to

ground by internal 50 Ω load

resistors when “off” (a reflective

version, the MGS-70008, which

terminates the “off” port to

ground, is also available). The

switch is sealed in a small, plastic,

surface-mount SO-8 package.

Switching is actuated by a -5 V

control voltage per the truth table

shown on the next page. -3.3␣ V

operation is also possible with

some reduction in P1 dB and IP3.

The MGS-71008 is designed for

high volume commercial applica-

tions where low insertion loss,

high isolation, and fast switching

speed are required. Its low cost

and high performance make it

suitable for a wide variety of uses

such as digital cellular, spread

spectrum, GPS, and other RF

switching applications. Refer to

applications note AN-G007 for

more application details.

The die is fabricated using HP’s

nominal 0.3␣ micron recessed

Schottky-barrier-gate, gold

metallization, and silicon nitride

passivation to achieve excellent

performance, uniformity, and

reliability.

SO-8 Package

AC Equivalent

Circuit / Pinout

J1

Ground

J2

Control 1

Ground

Ground

J3

Control 2

7-161

5965-9118E

Share Link: