RP10-2405SE_DE/M1 データシートの表示（PDF） - RECOM Electronic GmbH
部品番号
コンポーネント説明
一致するリスト
RP10-2405SE_DE/M1 Datasheet PDF : 5 Pages
| |||
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Input Voltage Range
12V nominal input
24V nominal input
48V nominal input
Input Filter
Input Surge Voltage (100 ms max.)
12V Input
24V Input
48V Input
Input Reflected Ripple (nominal Vin and full load) (see Note 3)
Start Up Time (nominal Vin and constant resistor load)
Remote ON/OFF (Optional. See Note 7)
(Positive logic)
(Negative logic)
Remote OFF input current
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
Nominal input
Output Power
Output Voltage Accuracy (full Load and nominal Vin)
Minimum Load (see Note 1)
Line Regulation (low line, high line at full load)
Load Regulation (25% to 100% full load)
Single
Dual
Cross Regulation (asymmetrical load 25%/100% full load)
Ripple and Noise (20MHz bandwith)
Single
Dual
Temperature Coefficient
Transient Response (25% load step change)
Over Voltage Protection
Zener diode clamp
3.3V output
5V output
12V output
15V output
Over Load Protection (% of full load at nominal Vin)
Short Circuit Protection
Efficiency
Isolation Voltage
Isolation Resistance
Isolation Capacitance
Operating Frequency
Approved to Safety Standards (see Note 9)
Operating Temperature Range
(Reference Derating Curve) (see Note 10)
Standard
M1
Maximum Case Temperature
Storage Temperature Range
www.recom-international.com
July-2006
RP10-S_DE
Series
9-18VDC
18-36VDC
36-75VDC
Pi Type
36VDC
50VDC
100VDC
30mAp-p
20ms typ.
Open or 3.5V < Vr < 12V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3.5V < Vr < 12V
20mA
10W max.
±2%
10% of full load
±1%
±1%
±2%
±5%
50mVp-p
75mVp-p
±0.02%/°C max.
500µs
3.9V
6.2V
15V
18V
150% typ
Hiccup, automatic recovery
see „Selection Guide“ table
1600VDC min.
1 GΩ min.
300pF max.
300kHz typ.
UL 1950, EN60950
-25°C to +85°C(with derating)
-40°C to +85°C(non derating)
+100°C
-55°C to +105°C
continued on next page
221
Share Link: 