RF2641
Pin Function Description
Interface Schematic
1
IF-
Balanced IF input pin. This pin is internally DC-biased and should be
BIAS
DC-blocked if connected to a device with a DC level present. For single-
ended input operation, one pin is used as an input and the other IF
input is AC-coupled to ground. The balanced, as well as single-ended, 130 Ω
130 Ω
input impedance is 260Ω.
IF-
IF+
2
IF+
Same as pin 1, except complementary input.
See Pin 1.
3
BYP
Bypass pin for internal bias circuitry. Bypass with a 1nF capacitor.
BYP
4
LO-
Balanced LO input pin. This pin is internally DC-biased and should be
DC-blocked if connected to a device with a DC level present. For single-
BIAS
ended input operation, one pin is used as an input and the other LO
input is AC-coupled to ground. The balanced, as well as single-ended,
6
input impedance is 50Ω.
LO-
LO+
5
LO+
Same as pin 4, except complementary input.
See Pin 4.
6
GND
Ground connection. For best performance, keep traces physically short
and connect immediately to ground plane.
7
VCC
Supply voltage pin. External bypassing is required. External RF, LO,
and IF bypassing is required. The trace length between the pin and the
bypass capacitors should be minimized. The ground side of the bypass
capacitors should connect immediately to ground plane.
8
RF OUT RF output pin.
300 Ω
RF OUT
Rev A5 010720
6-43