RELEASED
DATA SHEET
PMC-1980582
ISSUE 5
PM7351 S/UNI-VORTEX
OCTAL SERIAL LINK MULTIPLEXER
1 FEATURES
• Integrated analog/digital device that interfaces a high speed parallel bus to 8
bidirectional data streams, each transported over a high speed Low Voltage
Differential Signal (LVDS) serial link.
• Works with its sister device, the S/UNI-DUPLEX, to satisfy a full set of system
level requirements for backplane interconnect:
• Transports user data by providing the inter-card data-path.
• Inter-processor communication by providing an integrated inter-card
control channel.
• Exchanges flow control information (back-pressure) to prevent data
loss.
• Provides embedded command and control signals across the
backplane: system reset, error indications, protection switching
commands, etc.
• Clock/timing distribution (system clocks as well as reference clocks
such as 8 kHz timing references).
• Fault detection, redundancy, protection switching, and
inserting/removing cards while the system is running (hot swap).
• Each S/UNI-VORTEX Interfaces to 8 S/UNI-DUPLEX devices (via the LVDS
links) to create a point-to-multipoint serial backplane architecture.
• Up to 16 S/UNI-VORTEX devices (interfacing to a maximum of 128 S/UNI-
DUPLEXs) can reside on a single system bus.
• In the LVDS receive direction: accepts cell streams from the 8 LVDS links,
multiplexing them into a single cell stream which is presented to the system
bus as a single Utopia L2 compatible PHY.
• In the LVDS transmit direction: receives cell streams from the bus master,
and routes the cells to the appropriate serial link.
• Cell read/write to the 8 LVDS links is available via the microprocessor port.
Provides optional hardware assisted CRC32 calculation across cells to create
an embedded inter-processor communication channel across the LVDS links.
• Optionally routes the embedded control channels from the 8 link's to/ from the
system bus.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE 1