PDI1394L11BA データシートの表示（PDF） - Philips Electronics
部品番号
コンポーネント説明
一致するリスト
PDI1394L11BA Datasheet PDF : 46 Pages
| |||
Philips Semiconductors
1394 AV link layer controller
Product specification
PDI1394L11
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 spd
tLabel
rt tCode
0000
destinationID
rCode
Figure 5. Quadlet/Block Write Response Packet Transmit Format
SV00249
Table 1. No-Data Transmit Format
Field Name
Description
spd
This field indicates the speed at which this packet is to be sent. 00=100 Mbs, 01=200 Mbs, and 10=400 Mbs.
11 = undefined
tLabel
This field is the transaction label, which is used to pair up a response packet with its corresponding request
packet.
rt
The retry code for this packet. Supported values are: 00=retry1, and 01=retryX.
tCode
The transaction code for this packet.
DestinationID
Contains a node ID value.
DestinationOffsetHigh
DestinationOffsetLow
The concatenation of these two field addresses a quadlet in the destination node’s address space.
rCode
Response code for write response packet.
12.5.1.2 Quadlet Transmit
Three quadlet transmit formats are shown below. In these figures: The first quadlet contains packet control information. The second and third
quadlets contain 16-bit destination ID and either the 48-bit quadlet-aligned destination offset (for requests) or the response code (for
responses).
The fourth quadlet contains the quadlet data for read response and write quadlet request formats, or the upper 16 bits contain the data length
for the block read request format.
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
0 spd
tLabel
rt
tCode
0000
destinationID
destinationOffsetHigh
destinationOffsetLow
quadlet data
Figure 6. Quadlet Write Request Transmit Format
SV00251
1997 Oct 21
13
Share Link: 