OPB780Z データシートの表示（PDF） - Optek Technology

部品番号

コンポーネント説明

一致するリスト

OPB780Z

Reflective Color Sensor Assembly

Optek Technology 

Reflective Color Sensor Assembly

OPB780Z

Features:

• High-resolution conversion of light intensity to frequency

• Selectable color output frequency

• Communicates directly with a microcontroller

• Sensor power supply operation (2.7 V to 5.5 V)

• LED power separate input

• Includes LED, Sensor and interface cable

Description:

The OPB780Z color sensor uses a light-to-frequency converter that combines 64 configurable silicon photodiodes

(on a 144 um center and measuring 120 um x 120 um each), with a white LED in a small, lightweight package that

makes it ideal for using in miniature applications.

The output is a square wave (50% duty cycle) with a frequency directly proportional to reflected light intensity

(irradiance).

The light-to-frequency converter reads an 8 x 8 array of photodiodes that consists of four groups of 16 photodiodes

each, segregated by color: 16 photodiodes with red filters, 16 photodiodes with green filters, 16 photodiodes with

blue filters and 16 clear photodiodes with no filters. Each color’s group of 16 photodiodes is interdigitated to

minimize the effect of non-uniformity of the incident irradiance. Each color’s group is also connected in parallel.

The type of photodiode used during operation is pin-selectable.

The output of the device is designed to drive a standard TTL or CMOS logic input over short distances.

The internal photodiode used by the device is controlled by two logic inputs, S2 and S3. See page 4 for more

information.

A 10 “ [25.4 cm] Flat Flexible Cable (FFC) is included for easy hook-up.

The FFC is designed to interface with an AVX (ELCO) part number 04 6249 0080 00 800 connector.

For more information, contact your local representative or OPTEK.

Applications:

• Photographic equipment

• Colormetry

• Chemical analyzers

• Display contrast controls

• High resolution digital measurement of light

intensity

Light

Block Diagram

Photodiode Array

S2 S3

6

4

Current-to-Frequency

Converter

Out 3

Ordering Information

RoHS

OPB780Z OPB780 with 10” Long Flat Flex Cable

KA3128

10” Long Flat Flex Cable

OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747

FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Issue A.3 04/07

Page 1 of 6

Share Link: