MAX3676E データシートの表示（PDF） - Maxim Integrated
部品番号
コンポーネント説明
一致するリスト
MAX3676E Datasheet PDF : 16 Pages
| |||
622Mbps, 3.3V Clock-Recovery and
Data-Retiming IC with Limiting Amplifier
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VCC..............................................-0.5V to +6.5V
Input Voltage Levels,
DDI+, DDI-, ADI+, ADI- ...........................-0.5V to (VCC + 0.5V)
Input Differential Voltage (ADI+) - (ADI-)...............................±3V
PECL Output Currents, SDO+, SDO-, SCLKO+, SCLKO- ...100mA
LOL, LOP, INSEL, PHADJ+, PHADJ- .........-0.5V to (VCC + 0.5V)
FIL+, FIL-, OLC+, OLC-, RSSI, VTH ...........-0.5V to (VCC + 0.5V)
(OLC+) - (OLC-).....................................................................±3V
(FIL+) - (FIL-) ..................................................................±700mV
CFILT ...............................................(VCC - 2.5V) to (VCC + 0.5V)
INV.........................................................................-0.5V to +2.0V
Continuous Power Dissipation (TA = +85°C)
TQFP (derate 11.1mW/°C above +85°C) .....................721mW
Operating Junction Temperature Range ...........-40°C to +150°C
Storage Temperature Range .............................-65°C to +150°C
Processing Temperature (die) .........................................+400°C
Lead Temperature (soldering, 10sec) .............................+300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS
(VCC = +3.0V to +5.5V, TA = -40°C to +85°C, unless otherwise noted. Typical values are at TA = +25°C.) (Notes 1, 2)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX UNITS
Supply Current
MAX3676EHJ,
ICC
PECL outputs
unterminated
INSEL = VCC
INSEL = GND
72
111
mA
51
81
PECL Input Voltage High
PECL Input Voltage Low
PECL Input Current High
PECL Input Current Low
PECL Output Voltage High
PECL Output Voltage Low
LOP, LOL Voltage High
LOP, LOL Voltage Low
INV Input Bias Voltage
VIH
VIL
IIH
IIL
VOH
TA = 0°C to +85°C
TA = -40°C
VOL
TA = 0°C to +85°C
TA = -40°C
VOH
VOL
4kΩ between INV and VTH
VCC - 1.16
VCC - 0.88 V
VCC - 1.81
VCC - 1.48 V
-10
10
µA
-10
10
µA
VCC - 1.025
VCC - 1.085
VCC - 0.88
V
VCC - 0.88
VCC - 1.81
VCC - 1.83
VCC - 1.620
V
VCC - 1.555
2.4
V
0.1
0.4
V
1.10
1.23
1.30
V
Note 1: Dice are tested at Tj = +45°C, VCC = +4.25V.
Note 2: At TA = -40°C, DC characteristics are guaranteed by design and characterization.
2 _______________________________________________________________________________________
Share Link: 