MCP9700T(2005) データシートの表示（PDF） - Microchip Technology

部品番号

コンポーネント説明

一致するリスト

MCP9700T
(Rev.:2005)

Low-Power Linear Active Thermistor™ ICs

Microchip Technology 

4.4 Thermal Considerations

The MCP9700/01 measures temperature by monitor-

ing the voltage of a diode located in the die. A

low-impedance thermal path between the die and the

PCB is provided by the pins. Therefore, the

MCP9700/01 effectively monitors the temperature of

the PCB. However, the thermal path for the ambient air

is not as efficient because the plastic device package

functions as a thermal insulator from the die. This limi-

tation applies to plastic-packaged silicon temperature

sensors. If the application requires measuring ambient

air, the PCB needs to be designed with proper thermal

conduction to the sensor pins.

The MCP9700/01 is designed to source/sink 100 µA

(max.). The power dissipation due to the output current

is relatively insignificant. The effect of the output

current can be described using Equation 5-1.

EQUATION 4-2: EFFECT OF

SELF-HEATING

TJ – TA = θJA(VDDIDD + (VDD – VOUT)IOUT)

Where:

TJ = Junction Temperature

TA = Ambient Temperature

θJA = Package Thermal Resistance

(331°C/W)

VOUT = Sensor Output Voltage

IOUT = Sensor Output Current

IDD = Operating Current

VDD = Operating Voltage

At TA = +25°C (VOUT = 0.75V) and maximum specifica-

tion of IDD = 12 µA, VDD = 5.5V and IOUT = +100 µA,

the self-heating due to power dissipation (TJ – TA) is

0.179°C.

MCP9700/01

© 2005 Microchip Technology Inc.

DS21942B-page 9

Share Link: