MC07XSC200 データシートの表示（PDF） - Freescale Semiconductor

部品番号

コンポーネント説明

一致するリスト

MC07XSC200

Dual High Side Switch (7.0 mOhm)

Freescale Semiconductor 

3.3 Dynamic Electrical Characteristics

Table 4. Dynamic Electrical Characteristics

Characteristics noted under conditions 6.0 V VPWR  20 V, 3.0 V  VDD  5.5 V, - 40 C  TA  125 C, GND = 0 V unless

otherwise noted. Typical values noted reflect the approximate parameter means at TA = 25 °C under nominal conditions unless

otherwise noted.

Characteristic

Symbol

Min

Typ

Max

Unit

POWER OUTPUT TIMING HS0 TO HS1

Output Rising Medium Slew Rate (medium speed slew rate / SR[1:0] = 00)(25) SRR_00

• VPWR = 14 V

0.15

0.3

V/s

0.6

Output Rising Slow Slew Rate (low speed slew rate / SR[1:0] = 01)(25)

• VPWR = 14 V

SRR_01

V/s

0.07

0.15

0.3

Output Falling Fast Slew Rate (high speed slew rate / SR[1:0] = 10)(25)

• VPWR = 14 V

SRR_10

V/s

0.3

0.6

1.2

Output Falling Medium Slew Rate (medium speed slew rate / SR[1:0] = 00)(25) SRF_00

• VPWR = 14 V

0.15

0.3

V/s

0.6

Output Falling Slow Slew Rate (low speed slew rate / SR[1:0] = 01)(25)

• VPWR = 14 V

SRF_01

V/s

0.07

0.15

0.3

Output Rising Fast Slew Rate (high speed slew rate / SR[1:0] = 10)(25)

• VPWR = 14 V

SRF_10

V/s

0.3

0.6

1.2

HS[0:1] Outputs Turn-ON and OFF Delay Times(26)(27)

VPWR = 14 V for medium speed slew rate (SR[1:0] = 00)

• tDLY(ON)

• tDLY(OFF)

t DLY_12

s

80

130

180

40

90

140

Driver Output Matching Slew Rate (SRR /SRF)

SR

• VPWR = 14 V @ 25 °C and for medium speed slew rate (SR[1:0] = 00)

0.8

1.0

1.2

HS[0:1] Driver Output Matching Time (t DLY(ON) - t DLY(OFF))

t RF_01

• VPWR = 14 V, fPWM = 240 Hz, PWM duty cycle = 50%, @ 25 °C for

0

medium speed slew rate (SR[1:0] = 00)

s

50

100

Notes

25. Rise and Fall Slew Rates measured across a 5.0 resistive load at high side output = 30% to 70% (see Figure 4, page 19).

26. Turn-ON delay time measured from rising edge of any signal (IN[0:1] and CSB) that would turn the output ON to VHS[0:1] = VPWR / 2

with RL = 5.0  resistive load.

27. Turn-OFF delay time measured from falling edge of any signal (IN[0:1] and CSB) that would turn the output OFF to VHS[0:1] = VPWR / 2

with RL = 5.0  resistive load.

07XSC200

12

Analog Integrated Circuit Device Data

Freescale Semiconductor

Share Link: