MB88162 データシートの表示（PDF） - Fujitsu

部品番号

コンポーネント説明

一致するリスト

MB88162

Spread Spectrum Clock Generator

Fujitsu 

MB88162

■ LOCK-UP TIME

2.7/3.0 V

VDD

Oscillation stabilization

wait time

XIN

VIH

OE

Setting pin VIH

S1, S0,

MLTP

SPRD

OUT

tLK (lock-up time )

The clock oscillation stabilization wait time is required when the power is turned on.

If the OE pin is fixed at “H” level, the maximum time after the power is turned on until the required clock is obtained

is (the oscillation stabilization wait time of input clock to XIN pin) + (the lock-up time “tLK”) .

For the stabilization wait time of input clock to the XIN pin, check the characteristics of the resonator or oscillator

used.

VDD

2.7/3.0 V Oscillation stabilization

wait time

XIN

OE

Setting pin VIH

S1, S0,

MLTP

SPRD

OUT

VIH

tLK (lock-up time )

If the OE pin is used for power down control, the required clock is obtained at most the lock-up time “tLK” after the

OE pin goes “H” level.

16

Share Link: