MB88154 データシートの表示（PDF） - Fujitsu

部品番号

コンポーネント説明

一致するリスト

MB88154

Spread Spectrum Clock Generator

Fujitsu 

MB88154

■ LOCK-UP TIME

VDD

3.0 V

Internal clock

stabilization wait time

XIN

Setting pin VIH

SEL0,

SEL1

CKOUT

tLK

(lock-up time )

If the setting pin is fixed at the “H” or “L” level, the maximum time after the power is turned on until the set clock

signal is output from CKOUT pin is (the stabilization wait time of input clock to XIN pin) + (the lock-up time “tLK”).

For the input clock stabilization time, check the characteristics of the resonator or oscillator used.

Note : When the pin setting is changed, the CKOUT pin output clock stabilization time is required. Until the output

clock signal becomes stable, the output frequency, output clock duty cycle, modulation period, and cycle-

cycle jitter cannot be guaranteed. It is therefore advisable to perform processing such as cancelling a reset

of the device at the succeeding stage after the lock-up time.

12

Share Link: