MAX1110CAP(2011) データシートの表示（PDF） - Maxim Integrated
部品番号
コンポーネント説明
一致するリスト
MAX1110CAP Datasheet PDF : 20 Pages
| |||
+2.7V, Low-Power, Multichannel,
Serial 8-Bit ADCs
ABSOLUTE MAXIMUM RATINGS
VDD to AGND ..............................................................-0.3V to 6V
AGND to DGND .......................................................-0.3V to 0.3V
CH0–CH7, COM, REFIN,
REFOUT to AGND ......................................-0.3V to (VDD + 0.3V)
Digital Inputs to DGND ...............................................-0.3V to 6V
Digital Outputs to DGND ............................-0.3V to (VDD + 0.3V)
Continuous Power Dissipation (TA = +70°C)
QSOP (derate 8.30mW/°C above +70°C) .....................667mW
SSOP (derate 8.00mW/°C above +70°C) .....................640mW
Operating Temperature Ranges
MAX1110CAP/MAX1111CEE...............................0°C to +70°C
MAX1110EAP/MAX1111EGE............................-40°C to +85°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow) .......................................+260°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS
(VDD = 2.7V to 5.5V; unipolar input mode; VCOM = 0V; fSCLK = 500kHz, external clock (50% duty cycle); 10 clocks/conversion cycle
(50ksps); 1µF capacitor at REFOUT; TA = TMIN to TMAX; unless otherwise noted.)
PARAMETER
DC ACCURACY
Resolution
Relative Accuracy (Note 1)
Differential Nonlinearity
Offset Error
Gain Error (Note 3)
Gain Temperature Coefficient
Total Unadjusted Error
SYMBOL
CONDITIONS
INL
DNL
TUE
VDD = 2.7V to 3.6V
VDD = 5.5V (Note 2)
No missing codes over temperature
VDD = 2.7V to 3.6V
VDD = 5.5V (Note 2)
Internal or external reference
External reference, 2.048V
MIN TYP MAX UNITS
8
Bits
±0.15 ±0.5
LSB
±0.2
±1
LSB
±0.35 ±1
LSB
±0.5
±1
LSB
±0.8
ppm/°C
±0.3
±1
LSB
Channel-to-Channel
Offset Matching
±0.1
LSB
DYNAMIC SPECIFICATIONS (10.034kHz sine-wave input, 2.048VP-P, 50ksps, 500kHz external clock)
Signal-to-Noise
and Distortion Ratio
SINAD
49
dB
Total Harmonic Distortion
(up to the 5th harmonic)
THD
-70
dB
Spurious-Free Dynamic Range
Channel-to-Channel Crosstalk
Small-Signal Bandwidth
Full-Power Bandwidth
SFDR
VCH_ = 2.048VP-P, 25kHz (Note 4)
-3dB rolloff
68
dB
-75
dB
1.5
MHz
800
kHz
2 _______________________________________________________________________________________
Share Link: 