MASWSS0117 データシートの表示（PDF） - M/A-COM Technology Solutions, Inc.
部品番号
コンポーネント説明
一致するリスト
MASWSS0117 Datasheet PDF : 3 Pages
| |||
MASWSS0117
GaAs SPDT 2.7 V High Power Switch
DC - 3.0 GHz
Rev. V3
Electrical Specifications: TA = 25°C, VC = 0 V / 2.7 V, Z0 = 50 Ω2
Parameter
Test Conditions
Units
Min.
Typ. Max.
Insertion Loss3
Isolation
Return Loss
IP3
Cross Modulation
P0.1dB
DC - 1 GHz
1 - 2 GHz
2 - 3 GHz
DC - 1 GHz
1 - 2 GHz
2 - 3 GHz
DC - 3 GHz
825 MHz
Two Tone, +24 dBm Total Pin, 5 MHz Spacing
For Cell Band: Two-tone signal input: Tx1 = +22
dBm @ 820 MHz, Tx2 = +22 dBm @ 821 MHz,
RX interfere = -23 dBm @ 869 MHz.
For PCS Band: Two-tone signal input: Tx1 = +18
dBm @ 1880 MHz, Tx2 = +18 dBm @ 1881 MHz,
RX interfere = -23 dBm @ 1960 MHz.
1.0 GHz
dB
dB
dB
dBm
dBm
dBm
dBm
—
0.30
0.65
—
0.35
—
—
0.35
—
23
25
—
—
19
—
—
15
—
—
20
—
—
56
—
—
-99
—
—
-94
—
—
38
—
Trise, Tfall
10% to 90% RF, 90% to 10% RF
ns
—
70
—
Ton, Toff
Transients
50% control to 90% RF
50% control to 10% RF
In Band
ns
—
100
—
mV
—
25
—
Control Current
VC = 2.7 V
µA
—
5
20
2. For positive voltage control, external DC blocking capacitors are required on all RF ports.
3. Insertion loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 1 GHz, 39 pF for 0.5 - 3 GHz.
Absolute Maximum Ratings 4,5
Parameter
Input Power
(0.5 - 3 GHz, 3 V Control)
Operating Voltage
Operating Temperature
Storage Temperature
Absolute Maximum
+38 dBm
+8.5 volts
-40°C to +85°C
-65°C to +150°C
4. Exceeding any one or combination of these limits may cause
permanent damage to this device.
5. M/A-COM does not recommend sustained operation near
these survivability limits.
Truth Table 6,7,8
V1
V2
ANT– RF1 ANT - RF2
1
0
On
Off
0
1
Off
On
6. For positive voltage control, external DC blocking capacitors
are required on all RF ports.
7. Differential voltage, V (state 1) - V (state 0), must be +2.7 V
minimum, but must not exceed 8.5 V.
8. 0 = -5 V to +2.3 V, 1 = -2.3 V to +5 V.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Share Link: 