MAAPGM0036-DIE データシートの表示（PDF） - Tyco Electronics
部品番号
コンポーネント説明
一致するリスト
MAAPGM0036-DIE Datasheet PDF : 6 Pages
| |||
1.2-3.2 GHz 1.2W Power Amplifier
Features
♦ 1.2 Watt Saturated Output Power Level
♦ Variable Drain Voltage (4-10V) Operation
♦ MSAG™ MESFET Process
♦ Proven Manufacturability and Reliability
No Airbridges
Polyimide Scratch Protection
No Hydrogen Poisoning Susceptibility
MAAPGM0036-DIE
RO-P-DS-3017 B
Preliminary Information
Description
The MAAPGM0036-Die is a 2-stage power amplifier with on-chip bias
networks. This product is fully matched to 50 ohms on both the input and
output. It can be used as a power amplifier stage or as a driver stage in
high power applications.
Fabricated using M/A-COM’s repeatable, high performance and highly
reliable GaAs Multifunction Self-Aligned Gate MESFET Process, each
device is 100% RF tested on wafer to ensure performance compliance.
M/A-COM’s MSAG™ process features robust silicon-like manufacturing
processes, planar processing of ion implanted transistors, multiple im-
plant capability enabling power, low-noise, switch and digital FETs on a
single chip, and polyimide scratch protection for ease of use with auto-
mated manufacturing processes. The use of refractory metals and the
absence of platinum in the gate metal formulation prevents hydrogen
poisoning when employed in hermetic packaging.
Primary Applications
♦ 2.5-2.7 GHz MMDS
♦ GPS
♦ Radar
♦ Telemetry
Electrical Characteristics: TB = 40°C1, Z0 = 50 Ω, VDD = 8V, IDQ ≈ 460mA2, Pin = 18 dBm
Parameter
Symbol
Typical
Units
Bandwidth
f
1.2-3.2
GHz
Output Power
POUT
31
dBm
Power Added Efficiency
PAE
30
%
1-dB Compression Point
P1dB
30
dBm
Small Signal Gain
G
20
dB
Input VSWR
VSWR
1.4:1
Output VSWR
VSWR
1.8:1
Gate Supply Current
IGG
<5
mA
Drain Supply Current
Output Third Order Intercept
3rd Order Intermodulation Distortion
Single Carrier Level = 21 dBm
5th Order Intermodulation Distortion
Single Carrier Level = 21 dBm
IDD
OTOI
IM3
IM5
< 725
40
-10
-35
mA
dBm
dBm
dBm
Noise Figure
NF
2nd Harmonic
2f
3rd Harmonic
3f
5
dB
-12
dBc
-20
dBc
1. TB = MMIC Base Temperature
2. Adjust VGG between –2.4 and –1.5V to achieve indicated IDQ.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Share Link: 