MAAPGM0070(RevB) データシートの表示（PDF） - Tyco Electronics
部品番号
コンポーネント説明
一致するリスト
MAAPGM0070 Datasheet PDF : 8 Pages
| |||
Amplifier, Power, 1.9W
10.0-13.25 GHz
Assembly and Bonding Diagram
VDD
VGG
Gnd
RF
100-
200 pF
100-
200 pF
MAAPGM0070-DIE
Rev B
Preliminary Datasheet
VDD
0.01-0.1μF
GND
100-
200 pF
RFIN
RFOUT
VGG
0.01-0.1μF
100 Ω
100-
200 pF
100-
200 pF
100-
200 pF
GND
Figure 24. Recommended operational configuration. Wire bond as shown.
Die Handling:
Refer to Application Note AN3016.
Assembly Instructions:
Die Attach: Use AuSn (80/20) 1 mil. preform solder. Limit time @ 310 °C to less than
7 minutes. Refer to Application Note AN3017 for more detailed information.
Wirebonding: Bond @ 160 °C using standard ball or thermal compression wedge
bond techniques. For DC pad connections, use either ball or wedge bonds. For best
RF performance, use wedge bonds of shortest length, although ball bonds are also
acceptable.
Biasing Note: Must apply negative bias to VGG before applying positive bias to VDD to prevent
damage to amplifier.
8
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Share Link: 