MA4SW410B-1_V4 データシートの表示（PDF） - M/A-COM Technology Solutions, Inc.
部品番号
コンポーネント説明
一致するリスト
MA4SW410B-1_V4
M/A-COM Technology Solutions, Inc.
MA4SW410B-1_V4 Datasheet PDF : 6 Pages
| |||
MA4SW410B-1
HMIC™ Silicon PIN Diode Switch
with Integrated Bias Network
Rev. V4
MA4SW410B-1 (SP4T)
Electrical Specifications @ TAMB = +25oC, 10mA Bias current
Parameter
Insertion Loss
Isolation
Input Return Loss
Switching Speed1
Frequency
6 GHz
12 GHz
18 GHz
6 GHz
12 GHz
18 GHz
6 GHz
12 GHz
18 GHz
-
Minimum
-
-
-
40
35
30
-
-
-
-
Nominal
0.80
1.00
1.40
50
40
35
10
15
10
80
Maximum
1.0
1.2
1.6
-
-
-
-
-
-
-
Units
dB
dB
dB
dB
dB
dB
dB
dB
dB
ns
Note:
1.Typical switching speed measured from 10% to 90% of detected RF signal driven by TTL compatible drivers using RC
output spiking network, R = 50 – 200Ω , C = 390 – 560pF.
Operation of the MA4SW410B-1
Operation of the HMIC Series of PIN switches is achieved by the simultaneous application of negative DC
current to the low loss port and positive DC current to the remaining isolated switching ports per the Driver
Connections table below. The control currents should be supplied by constant current sources. For insertion
loss, -10mA bias results in approximately –2V, and for Isolation ,+10mA yields approximately +0.9V at the
respective bias nodes. The backside area of the die is the RF and DC return ground plane.
Driver Connections
CONTROL LEVEL (DC CURRENT)
B2
B3
B4
-10mA
+10mA
+10mA
+10mA
+10mA
-10mA
+10mA
+10mA
+10mA
+10mA
-10mA
+10mA
B5
+10mA
+10mA
+10mA
-10mA
J1-J2
CONDITION OF RF OUTPUT
J1-J3
J1-J4
J1-J5
Low Loss
Isolation
Isolation
Isolation
Isolation
Low Loss
Isolation
Isolation
Isolation
Isolation
Low Loss
Isolation
Isolation
Isolation
Isolation
Low Loss
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.43537383
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Share Link: