Intel® LXT972M Single-Port 10/100 Mbps PHY Transceiver
4.0
Signal Descriptions for Intel® LXT972M Transceiver
Intel recommends the following configurations for unused pins:
• Unused inputs. Configure all unused inputs and unused multi-function pins for inactive states.
• Unused outputs. Leave all unused outputs floating.
• No connects. Do not use pins designated as NC (no connect), and do not terminate them.
Note: For the tables in this section, the abbreviations listed in Table 2, “Intel® LXT972M Transceiver
Signal Types” on page 13 are used for the “Type” column.
Tables in this section include the following
• Table 4, “Intel® LXT972M Transceiver MII Data Interface Signal Descriptions”
• Table 5, “Intel® LXT972M Transceiver MII Controller Interface Signal Descriptions”
• Table 6, “Intel® LXT972M Transceiver Network Interface Signal Descriptions”
• Table 7, “Intel® LXT972M Transceiver Standard Bus and Interface Signal Descriptions”
• Table 8, “Intel® LXT972M Transceiver Configuration and LED Driver Signal Descriptions”
• Table 9, “Intel® LXT972M Transceiver Power, Ground, No-Connect Signal Descriptions”
• Table 10, “Intel® LXT972M Transceiver JTAG Test Signal Descriptions”
• Table 11, “Intel® LXT972M Transceiver Pin Types and Modes”
Datasheet
15
Document Number: 302875-005
Revision Date: 27-Oct-2005