LM2931(2007) データシートの表示（PDF） - ON Semiconductor
部品番号
コンポーネント説明
一致するリスト
LM2931
(Rev.:2007)
(Rev.:2007)
ON Semiconductor
LM2931 Datasheet PDF : 23 Pages
| |||
LM2931, NCV2931 Series
80
3.5
PD(max) for TA = 50°C
70
Free Air
3.0
Mounted
Vertically
60
Minimum
50
Size Pad
40
2.0 oz. Copper
L
2.5
ÎÎÎÎÎÎÎÎ L
2.0
ÎÎÎÎÎÎÎÎ1.5
RqJA
30
1.0
0
5.0
10
15
20
25
30
L, LENGTH OF COPPER (mm)
Figure 26. 3−Pin and 5−Pin D2PAK
Thermal Resistance and Maximum Power
Dissipation versus P.C.B. Copper Length
300
1.8
PD(max) for TA = 50°C
1.6
250
1.4
200
150
100
2.0 oz. Copper
L
ÎÎÎÎÎÎÎÎÎ L
1.2
1.0
0.8
0.6
0.4
50
RqJA
0.2
0
0.0
0
5.0
10
15
20
25
30
L, LENGTH OF COPPER (mm)
Figure 27. SOT−223 Thermal Resistance and Maximum
Power Dissipation vs. P.C.B. Copper Length
DEFINITIONS
Dropout Voltage − The input/output voltage differential
at which the regulator output no longer maintains regulation
against further reductions in input voltage. Measured when
the output decreases 100 mV from nominal value at 14 V
input, dropout voltage is affected by junction temperature
and load current.
Line Regulation − The change in output voltage for a
change in the input voltage. The measurement is made under
conditions of low dissipation or by using pulse techniques
such that the average chip temperature is not significantly
affected.
Load Regulation − The change in output voltage for a
change in load current at constant chip temperature.
Maximum Power Dissipation − The maximum total
device dissipation for which the regulator will operate
within specifications.
Bias Current − That part of the input current that is not
delivered to the load.
Output Noise Voltage − The rms AC voltage at the
output, with constant load and no input ripple, measured
over a specified frequency range.
Long−Term Stability − Output voltage stability under
accelerated life test conditions with the maximum rated
voltage listed in the devices electrical characteristics and
maximum power dissipation.
http://onsemi.com
11
Share Link: