ICS670-02 データシートの表示（PDF） - Integrated Circuit Systems
部品番号
コンポーネント説明
一致するリスト
ICS670-02 Datasheet PDF : 6 Pages
| |||
ICS670-02
LOW PHASE NOISE, ZERO DELAY BUFFER AND MULTIPLIER
External Components
The ICS670-02 requires a minimum number of external components for proper operation. Decoupling
capacitors of 0.01mF should be connected between VDD and GND on pins 4 and 5, and VDD and GND on
pins 13 and 12, as close to the device as possible. A series termination resistor of 33Ω may be used to
each clock output pin to reduce reflections.
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS670-02. These ratings,
which are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of
the device at these or any other conditions above those indicated in the operational sections of the
specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can
affect product reliability. Electrical parameters are guaranteed only over the recommended operating
temperature range.
Item
Supply Voltage, VDD
All Inputs and Outputs
Ambient Operating Temperature
Storage Temperature
Junction Temperature
Soldering Temperature
Rating
7V
-0.5 V to VDD+0.5 V
0 to +70°C
-65 to +150°C
150°C
260°C
Recommended Operation Conditions
Parameter
Ambient Operating Temperature
Power Supply Voltage (measured in respect to GND)
Min.
0
+3.0
Typ.
Max.
+70
+5.5
Units
°C
V
DC Electrical Characteristics
VDD=3.3 V ±10%, Ambient temperature -40 to +85°C, unless stated otherwise
Parameter
Symbol
Conditions
Min.
Operating Voltage
VDD
3.0
Input High Voltage
Input Low Voltage
Output High Voltage
Output Low Voltage
Output High Voltage,
CMOS level
VIH
VIL
VOH
VOL
VOH
IOH = -12 mA
IOL = 12 mA
IOH = -4 mA
2
2.4
VDD-0.4
Operating Supply Current
IDD No Load
Typ.
35
Max.
5.5
0.8
0.4
Units
V
V
V
V
V
V
mA
MDS 670-02 F
3
Revision 031805
Integrated Circuit Systems l 525 Race Street, San Jose, CA 95126 l tel (408) 297-1201 l www.icst.com
Share Link: 