ICS570-01 データシートの表示（PDF） - Integrated Device Technology

部品番号

コンポーネント説明

一致するリスト

ICS570-01

MULTIPLIER AND ZERO DELAY BUFFER

Integrated Device Technology 

ICS570-01

MULTIPLIER AND ZERO DELAY BUFFER

ZDB AND MULTIPLIER

External Components

The ICS570-01 requires a minimum number of external components for proper operation. Decoupling capacitors of

0.01 µF should be connected between VDD and GND (pins 3, 6, and 7), as close to the device as possible. A series

termination resistor of 33Ω may be used on each clock output pin to reduce reflections.

Absolute Maximum Ratings

Stresses above the ratings listed below can cause permanent damage to the ICS570-01. These ratings, which are

standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these

or any other conditions above those indicated in the operational sections of the specifications is not implied.

Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical

parameters are guaranteed only over the recommended operating temperature range.

Item

Supply Voltage, VDD

All Inputs and Outputs

Ambient Operating Temperature, Commercial version

Ambient Operating Temperature, Industrial version

Storage Temperature

Junction Temperature

Soldering Temperature

Rating

7V

-0.5 V to VDD+0.5 V

0 to +70° C

-40 to +85° C

-65 to +150° C

125° C

260° C

Recommended Operation Conditions

Parameter

Ambient Operating Temperature

Power Supply Voltage (measured in respect to GND)

Min.

-40

+3.15

Typ.

+3.3

Max.

+85

+3.45

Units

°C

V

IDT™ / ICS™ MULTIPLIER AND ZERO DELAY BUFFER

3

ICS570-01 REV B 072706

Share Link: