HPP804B130 データシートの表示（PDF） - Humirel

部品番号

コンポーネント説明

一致するリスト

HPP804B130

TEMPERATURE AND RELATIVE HUMIDITY SENSOR

Humirel 

TECHNICAL 4 DATA

QUALIFICATION PROCESS

HTS2030SMD sensors have been qualified through a complete qualification process taking in account

many of the requirements of the JEDEC standard including:

• Solder heat and solderability including

lead free process.

• High Temperature / Humidity Operating

Life - 93%RH / 60°C for 1000 hours

• Pb free wave soldering and reflow

soldering process(260°C) + DI water

clean at 45°C

• Mechanical shock JESD-22-B104-A

• Vibration - Variable frequency(20 to

2000Hz) JESD-22-B103-A

• Low Humidity storage life - RH <

10%/23°C - 1000 hours

• Resistance to immersion in water at

ambient temperature and 80°C

• High temperature storage 140°C for 168

hours.

• Marking permanency

• ESD - Electrostatic Discharge –Air Gun

+-15kV(IEC 1000)

• Resistance to many chemicals linked to

home appliances/automotive or

consumer applications.

• Salt Atmosphere JESD22-A107-A

• Temperature Cycling - 40°C / +125°C

ENVIRONMENTAL AND RECYCLING

HTS2030SMD sensors are lead free components and are compatible with Pb Free soldering

processes.HTS2030SMD sensors are free from Cr (6+), Cd and Hg.

SOLDERING INSTRUCTIONS

See Application Note. To get it, please contact: application@humirel.com

PACKAGE OUTLINE HTS2030SMD GULL WING (JLEAD option also available)

Dimensions in millimeters

FOOTPRINT

ORDERING INFORMATION of HTS2030SMD:

• HPP804B130: TUBE M.P.Q. OF 78 PIECES.

• HPP804B131: TAPE AND REEL M.P.Q. OF 1500 PIECES.

TEMPERATURE AND RELATIVE HUMIDITY SENSORS.

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsability is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent

rights to the manufacturer. Humirel reserves the right to make changes without further notice to any product herein. Humirel makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Humirel

assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. « Typical » parameters can and do vary in different applications.

All operating parameters, including « Typical » must be validated for each customer applications by customer’s technical experts. Humirel does not convey any license under its patent rights nor the rights of others. Humirel products are not designed,

intended, or authorized for use as components in systems intended for surgical implant into the body, or other application intended to support or sustain life, or for any application in which the failure of the Humirel product could create a situation where

personal injury or death may occur. Should buyer purchase or use Humirel products for any such unintended or unauthorized application, Buyer shall indemnify and hold Humirel and its officers, employees, subsidaries, affiliates and distributors

harmless against all claims, costs, damages and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of presonal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Humirel

was negligent regarding the design or manufacture of the part.Humirel is a registred trade mark of Humirel.

HUMIREL HPC055 Rev0 June 2004

HTS2030SMD

Share Link: