HMC-C083 データシートの表示（PDF） - Hittite Microwave

部品番号

コンポーネント説明

一致するリスト

HMC-C083

MicroSynth® INTEGRATED SYNTHESIZER MODULE, 2 - 6 GHz

Hittite Microwave 

v00.0710

HMC-C083

MicroSynth® INTEGRATED

SYNTHESIZER MODULE, 2 - 6 GHz

Pin Descriptions

Pin Number

Function

1, 10

N/C

2-3

4

5

6

7

GPIO2, GPIO3

SEN

SDI

SCK

LD

Description

The pins are not connected internally; however, all data

shown herein was measured with these pins connected

to RF/DC ground externally.

General Purpose I/O with Tristate

Serial port Enable Input

Serial port Data input

Serial port Clock input

Lock Detect

8, 12, 14

Vd3, Vd2, Vd1

Voltage Supply Pins

Interface Schematic

See operating guide. [1]

See operating guide. [1]

See operating guide. [1]

See operating guide. [1]

See operating guide. [1]

10

9, 13

GND

These pins must be connected to RF/DC ground.

11

Ve1

Note: Voltage supply pin may be grounded if operation

2.1 - 6.0 GHz is acceptable.

Reference input, 10 MHz nominal, 220 MHz maximum.

15

REFIN

Note: the comparison frequency (reference freq./R) may

not exceed 75 MHz and the module performance is not

specified at comparison frequencies other than 10 MHz.

16

RFOUT

Synthesizer RF output.

[1] To view the Operating Guide, please visit www.hittite.com and choose HMC-C083 from the “Search by Part Number” pull down menu.

10 - 5

For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

Share Link: