FH12-16S-1SV データシートの表示（PDF） - HIROSE ELECTRIC

部品番号

コンポーネント説明

一致するリスト

FH12-16S-1SV

0.5mm and 1mm Pitch Connectors For FPC/FFC

HIROSE ELECTRIC 

qTop Contact Type

Operation

1. FPC/FFC Termination procedure.

Connector installed on the board.

1) Lift up the actuator. Use thumb or index finger.

Precautions

1) Avoid forcing the actuator up or down without the

FPC/FFC inserted.

2) Fully insert the FPC/FFC parallel to mounting sur-

face, with the exposed conductive traces facing

UP.

FPC insertion area

FPC/FFC conductive traces

2) When closing down the actuator apply equal pres-

sure to both sides of the actuator.

Stiffener

3) Rotate down the actuator until firmly closed.

It is critical that the inserted FPC/FFC is not moved

and remains fully inserted. Should the FPC/FFC be

moved, open the actuator and repeat the process,

starting with Step 1 above.

2. FPC/FFC Removal

1) Lift up the actuator.

2) Carefully remove the FPC/FFC.

3) Avoid forced pulling of the FPC. Forced pulling

will cause the FPC to become disconnected or

damaged.

10

Share Link: